Monday, September 21, 2015

How to Cut a Thumbnail Profile on a Tabletop

Recently I was finishing up another short run of ogee planes and decided to make a few thumbnail planes that I have had on my "to do" list, as well. It also gave me a chance to explain how this plane can be used. I shot a short video to show the general process.

This thumbnail plane is technically a "Roman" profile and not really "Grecian". That is to say that the arch of the curved profile is not elliptical. However because of the way the arch is laid out on the plane, changing the spring angle can give you an elliptical appearance to the profile. Holding the plane at about 30˚ will give you a more true Roman profile while holding the plane at about 25˚ will result in more of a Grecian or elliptical appearance. It may not seem obvious but if you held the plane and used it you would see the results and why you can achieve this with a simple change.

Here is the video below. I think the only thing I might add to this video that I didn't mention is that you may want to back up the cross grain cuts if you experence exaggerated blow out on the lower portion of the profile. If it is large blow out then it may not get planed away when making the long grain cuts. If that's the case, just place a block of wood equal in thickness to support the wood behind the cut and you will be fine.

Enjoy!



8 comments:

  1. Caleb...
    Is that the L-N Small Shoulder Plane or the Medium?
    Thx.
    Ken Lomas

    ReplyDelete
  2. Great video Caleb. Very informative and awesome work as always! What size is that rabbet plane you made a couple passes with?

    Chris Thompson

    ReplyDelete
    Replies
    1. Chris,
      It's the small Lie Nielsen shoulder plane.

      Delete
    2. Oops. Yes that is a 1" rabbet plane.

      Delete
  3. Thanks but I was referring to the wooden rabbet plane you used after the Jack plane.

    Chris Thompson

    ReplyDelete
  4. Wonderful stuff as always Caleb.

    ReplyDelete
  5. Wonderful stuff as always Caleb.

    ReplyDelete